Industrial Controls & Automation

View cart “LC1D09BD” has been added to your cart.

LC1F265F7

LC1F265F7  – TeSys F Contactor – 3P (3 NO) – AC-3 – <= 440 V 265 A – coil 110 V AC.

$1,050.00

Available on backorder

Main
range
TeSys
product name
TeSys F
product or component type
Contactor
device short name
LC1F
contactor application
Resistive load
Motor control
utilisation category
AC-1
AC-4
AC-3
poles description
3P
power pole contact composition
3 NO
[Ue] rated operational voltage
<= 1000 V AC 50/60 Hz
<= 460 V DC
[Ie] rated operational current
350 A (at <40 °C) at <= 440 V AC AC-1
265 A (at <55 °C) at <= 440 V AC AC-3
motor power kW
132 kW at 380…400 V AC 50/60 Hz (AC-3)
140 kW at 415 V AC 50/60 Hz (AC-3)
140 kW at 440 V AC 50/60 Hz (AC-3)
160 kW at 500 V AC 50/60 Hz (AC-3)
160 kW at 660…690 V AC 50/60 Hz (AC-3)
147 kW at 1000 V AC 50/60 Hz (AC-3)
75 kW at 220…230 V AC 50/60 Hz (AC-3)
51 kW at 400 V AC 50/60 Hz (AC-4)
[Uc] control circuit voltage
110 V AC 40…400 Hz
Complementary
[Uimp] rated impulse withstand voltage
8 kV
overvoltage category
III
[Ith] conventional free air thermal current
350 A (at 40 °C)
rated breaking capacity
2120 A conforming to IEC 60947-4-1
[Icw] rated short-time withstand current
2200 A 40 °C – 10 s
1230 A 40 °C – 30 s
950 A 40 °C – 1 min
620 A 40 °C – 3 min
480 A 40 °C – 10 min
associated fuse rating
315 A aM at <= 440 V
400 A gG at <= 440 V
average impedance
0.3 mOhm – Ith 350 A 50 Hz
[Ui] rated insulation voltage
1000 V conforming to IEC 60947-4-1
1500 V conforming to VDE 0110 group C
power dissipation per pole
37 W AC-1
21 W AC-3
mounting support
Plate
standards
EN 60947-4-1
JIS C8201-4-1
EN 60947-1
IEC 60947-1
IEC 60947-4-1
product certifications
BV
RINA
CSA
UL
DNV
RMRoS
CB
LROS (Lloyds register of shipping)
ABS
connections – terminals
Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable end
Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable end
Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable end
Control circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end
Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²solid without cable end
Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²solid without cable end
Power circuit: bar 2 cable(s) – busbar cross section: 32 x 4 mm
Power circuit: lugs-ring terminals 1 cable(s) 240 mm²
Power circuit: connector 1 cable(s) 240 mm²
Power circuit: bolted connection
tightening torque
Control circuit: 1.2 N.m
Power circuit: 35 N.m
control circuit voltage limits
Operational: 0.85…1.1 Uc 40…400 Hz (at 55 °C)
Drop-out: 0.15…0.2 Uc 40…400 Hz (at 55 °C)
inrush power in VA
650 VA 40…400 Hz cos phi 0.9 (at 20 °C)
hold-in power consumption in VA
10 VA 40…400 Hz cos phi 0.9 (at 20 °C)
heat dissipation
8 W
operating time
40…65 ms closing
100…170 ms opening
mechanical durability
10 Mcycles
maximum operating rate
2400 cyc/h 55 °C
compatibility code
LC1F
motor power range
55…100 kW at 200…240 V 3 phases
110…220 kW at 480…500 V 3 phases
110…220 kW at 380…440 V 3 phases
motor starter type
Direct on-line contactor
contactor coil voltage
110 V AC standard