Description
range of product | Harmony XAC |
|
---|---|---|
product or component type |
Pendant control station |
|
device short name |
XACA |
control station type |
Double insulated |
|
---|---|---|
enclosure material |
Polypropylene |
|
electrical circuit type |
Control circuit |
|
enclosure type |
Complete ready for use |
|
control station application |
Control of single speed hoist motor |
|
control station composition |
8 push-buttons |
|
control button type |
First push-button 1 NO raise, slow Second push-button 1 NO lower, slow Fourth push-button 1 NO left, slow Third push-button 1 NO right, slow Fifth push-button 1 NO forward slow Sixth push-button 1 NO reverse, slow Eighth push-button 1 NC O Seventh push-button 1 NO I |
|
product compatibility |
ZB2BE101 for each direction (except eighth) ZB2BE102 for eighth direction |
|
mechanical interlocking |
With mechanical interlocking between pairs |
|
control station colour |
Yellow |
|
connections – terminals |
Screw clamp terminals, 1 x 0.5…1 x 2.5 mm² without cable end Screw clamp terminals, 1 x 0.5…2 x 1.5 mm² with cable end |
|
standards |
EN/IEC 60947-5-1 CSA C22.2 No 14 EN/IEC 60204-32 UL 508 |
|
product certifications |
CCC GOST |
|
protective treatment |
TH |
|
ambient air temperature for operation |
-25…70 °C |
|
ambient air temperature for storage |
-40…70 °C |
|
vibration resistance |
15 gn (f= 10…500 Hz) conforming to IEC 60068-2-6 |
|
shock resistance |
100 gn conforming to IEC 60068-2-27 |
|
overvoltage category |
Class II conforming to IEC 61140 |
|
IP degree of protection |
IP65 conforming to IEC 60529 |
|
IK degree of protection |
IK08 conforming to EN 50102 |
|
mechanical durability |
1000000 cycles |
|
cable entry |
Rubber sleeve with stepped entry 8…26 mm |
|
contact code designation |
A600 AC-15, Ue = 240 V, Ie = 3 A conforming to IEC 60947-5-1 appendix A A600 AC-15, Ue = 600 V, Ie = 1.2 A conforming to IEC 60947-5-1 appendix A Q600 DC-13, Ue = 250 V, Ie = 0.27 A conforming to IEC 60947-5-1 appendix A Q600 DC-13, Ue = 600 V, Ie = 0.1 A conforming to IEC 60947-5-1 appendix A |
|
[Ithe] conventional enclosed thermal current |
10 A |
|
[Ui] rated insulation voltage |
600 V (pollution degree 3) |
|
[Uimp] rated impulse withstand voltage |
6 kV conforming to IEC 60947-1 |
|
contact operation |
Slow-break |
|
maximum resistance across terminals |
25 MOhm |
|
operating force |
10 N push-button 8 N eighth push-button |
|
short-circuit protection |
10 A fuse protection by cartridge fuse type gG |
|
rated operational power in W |
40 W DC-13 for 1000000 cycles, operating rate <60 cyc/mn at 120 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C 48 W DC-13 for 1000000 cycles, operating rate <60 cyc/mn at 48 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C 65 W DC-13 for 1000000 cycles, operating rate <60 cyc/mn at 24 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C |
|
terminals description ISO n°1 |
(13-14)NO |
|
terminals description ISO n°2 |
(11-12)NC |
|
terminal identifier |
(11-12)NC (13-14)NO |
|
net weight |
0.94 kg |
Additional information
Weight | 2.07 lbs |
---|